Electromagnetic flow meter is most recognized and widely acceptable fTurbine flowmeters works by using the energy of the fluid passing through it to move a rotor within the water or other fluid passing through. There are blades on this rotor, which are angled in such a way so they use the fluid to create a rotation, and move the rotor around in a clockwise or anti-clockwise motion.

The rotor blades are attached to a rod, which is able to spin through the use of bearings. The faster the fluid moves through the turbine flowmeter, the faster the rotor blades turn and, as a result, the faster the rod spins.

You can monitor how fast or slow the blades are turning by attaching a sensor or magnet onto the blades. Using the magnetic method, the magnets are attached onto the blades and as they spin, they pass a small piece of metal embedded at a certain point within the flowmeter itself. This way, using the time it takes between each time the magnet connects with the piece of metal, the speed of the fluid can be judged accurately. The brilliance of this system is that these sensors can work whichever way the fluid flows through the turbine flowmeter.

It is available in wide range of Sizes from ½” to 12” and suitable for Liquids (water, Milk, Diesel, Cooking oil) and low pressure Gases (LPG, Propane, Butane).

Flowmeter in whole world without any wear/moving parts and manufactured in a high-accuracy and manufactured on the basis of faraday’s law in latest international technology with Compact and Remote display. It is widely applied in water purification industry, Municipality water supplies, Chilled water system, paper industry, chemical industry, metallurgical industry, sewage/drainage, waste water treatment, liquid high-pressure metering, medical care, food, and environmental protection industries. Available in wide range of sizes from DN15-DN2000. Customized solution is also available.